Card-Level LEDs on the Channelized (STM-1/OC-3) Line Card
LED
Link
Card-Level LEDs on the Channelized (STM-1/OC-3) Line Card
Each Channelized line card (CLC2) is equipped with card-level status LEDs:
• Run/Fail
• Active
• Standby
The location of these LEDs is displayed in the figure below. The various states are described in the following
three tables.
Figure 57: Card-Level Status LEDs for the Channelized Line Card
ASR 5000 Installation Guide
160
LED Color
Green (On)
Yellow (On)
OFF
Applying Power and Verifying the Installation
Description
Illuminates Green when a fiber optic cable is plugged
into the port and the receive signal is detected by the
SFP module.
Illuminates Yellow when an SFP module is plugged
into the port.
Off indicates that there is no SFP module plugged into
the port.