Checking The Leds On The Spio(S) - Cisco ASR 5000 Installation Manual

Checking the LEDs on the SPIO(s)

Checking the LEDs on the SPIO(s)
Each SPIO is equipped with status LEDs:
• Run/Fail
• Active
• Standby
In addition to the status LEDs, each the RJ-45 and SFP interfaces to the management network are equipped
with the following LEDs:
• Link
• Activity
The following figure shows the LEDs on the SPIO.
The possible states for all of the SPIO's LEDs are described in the sections that follow.
Figure 54: SPIO LEDs
SPIO Run/Fail LED States
The SPIO's Run/ Fail LED indicates the overall status of the card. This LED is illuminated steady green for
normal operation.
If the LED is not green, use the troubleshooting information in the table to diagnose the problem.
ASR 5000 Installation Guide
148
Applying Power and Verifying the Installation