What To Do With The Failed Pfu - Cisco ASR 5000 Installation Manual

Replacing a Power Filter Unit
Caution To avoid the risk of electric shock and/or potential damage to the system, never operate the chassis without
the plastic terminal cover.
In addition, the power and return lugs must not protrude past the edge of the plastic terminal covers. Any
portion of the lug that is exposed must be covered with shrink wrap.
Step 10 Apply power to the PFUs using the information and instructions in the Applying Power to the Chassis section of the
Applying Power and Verifying the Installation chapter of this guide.

What to do with the Failed PFU

If the failed PFU is still under warranty, return it to the vendor for repair.
If the failed PFU is out of warranty, contact Cisco to determine if it can be sent in for repair at an additional
cost.
Important
Refer to the support area of http://www.cisco.com for up-to-date product documentation pertaining to
installation, configuration, and maintenance. A valid username and password is required to use this site. Please
contact your local sales or service representative for additional information.
Important
Disposal of this product should be performed in accordance with all national laws and regulations.
For additional information on the RMA process, see the RMA Shipping Procedures appendix.
What to do with the Failed PFU
ASR 5000 Installation Guide
203