Before You Start; Tools; Additional Security - ALLIANCE CDS9GC Installation & Operation Manual

Before You Start

Tools

For most installations, the basic tools you will need
are:
1 2
8
7
1 Wrench
2 1/4 inch Driver
3 Screwdrivers
4 Level
5 Gloves
6 Teflon Tape
7 Duct Tape
8 Safety Glasses
Figure 1
NOTE: A 20.32 cm (8 in.) coin drawer is required
for coin operated MDC and NetMaster models.
512691R4
3 4
5
6
DRY2586N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Additional Security

Torx security screws are available (as optional
equipment at extra cost) for securing both lower access
panels to each dryer base. Order Part No. 62853.
A Torx bit, Part No. 282P4, is available (as optional
equipment at extra cost) for installing the Torx security
screws.
A Torx bit holder, Part No. 24161, is available (as
optional equipment at extra cost) to be used with the
Torx bit.
WARNING
Any disassembly requiring the use of
tools must be performed by a suitably
qualified service person.
Installation
W299
7