Models Starting Serial No. 0909; Resetting Cycle Time To Zero - ALLIANCE CDS9GC Installation & Operation Manual

Vending

Models Starting Serial No. 0909

Resetting Cycle Time to Zero

To remove any cycle time that may have accumulated
on the control during setup, the cycle time on the
control can be reset to zero.
To reset the time, unplug the dryer and set dipswitch 8
to ON position. Restore power to the dryer for 10
seconds and once again unplug dryer. Set dipswitch 8
to OFF position and restore power to the dryer.
24 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 512691R4