Before You Call For Service - ALLIANCE BA120E Installation Manual

Won't Start
•
•
•
•
•
•
•
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT

Before You Call for Service

Won't Heat Clothes Not Dry
•
•
•
•
• •
• •
• •
Possible Reason – Corrective Actions
Insert correct coin(s) or valid card if applicable.
Close the loading door tightly.
Close lint panel tightly.
Press the PUSH-TO-START or START pad/button.
Be sure power cord is plugged all the way into the elec-
trical outlet and hard or direct wire connections are
tight.
Check the main fuse and circuit breaker.
Check fuses located in the machine.
Insufficient airflow.
Gas shut-off valve in OFF position.
Are controls properly set?
Broken drive belt. Call the service person.
Tumble dryer is in Cool Down Mode.
Lint screen clogged. Clean lint screen.
Exhaust duct to outside is blocked. Clean out.
65
Before You Call for Service
Part No. 70532501ENR7