Step 6: Start Dryer - ALLIANCE CDS9GC Installation & Operation Manual

Step 6: Start Dryer

Nonmetered Models
Rotate timer knob to desired time setting (up to 60
minutes). Press the PUSH-TO-START button. IN USE
light will come on (indicating start of cycle).
Figure 37
512691R4
DRY2101N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Coin Slide Models
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle),
press the PUSH-TO-START button.
Figure 38
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to
Maintenance section.
NOTE: This machine includes an extended tumble
feature. Starting 20 minutes after a cycle ends, the
cylinder will tumble for two minutes every hour
without heat, up to 18 hours or until door is
opened.
IMPORTANT: The final part of dryer cycle occurs
without heat (cool down cycle) to ensure that items
in dryer are left at a temperature that ensures that
the items will not be damaged.
WARNING
To prevent the risk of fire, never stop a
dryer before the end of the drying cycle
unless all items are quickly removed and
spread out so that the heat is dissipated.
Operation
D363I
W756
33