Table of Contents
Advertisement
Step 7: Start Dryer
To start dryer, push START pad.
To stop dryer at any time, open the door. To restart the
dryer, close door and push START pad.
Cycle is completed when time remaining reaches
00 minutes.
Figure 54
IMPORTANT: The final part of dryer cycle occurs
without heat (cool down cycle) to ensure that items
in dryer are left at a temperature that ensures that
the items will not be damaged.
WARNING
To prevent the risk of fire, never stop a
dryer before the end of the drying cycle
unless all items are quickly removed and
spread out so that the heat is dissipated.
512691R4
D778I
D778I
W756
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Indicator Lights
INSERT COINS/CARD
INSERT COINS/CARD is lit to prompt the user to
insert coins or a card to satisfy the vend price. When
INSERT COINS/CARD is lit, the three digits and
decimal point will display the vend price remaining to
be satisfied.
START
START is lit whenever the dryer is not in a cycle, the
full vend price has been satisfied and the dryer door is
closed. When the START pad is pressed, the cycle
will begin or resume.
DRYING
DRYING is lit to indicate that one of the heated cycles
(HIGH TEMP, MED TEMP, or LOW TEMP) is
currently in operation. DRYING will turn off at the end
of a heated cycle or when the COOL DOWN cycle
begins.
COOL DOWN
COOL DOWN is lit whenever the COOL DOWN
portion of a heated cycle is active. It is also lit when
the NO HEAT cycle is in operation.
ADD TIME (Card Models Only)
ADD TIME flashes when a card is inserted while a
cycle is running or when a card is left in the reader for
at least five seconds after cycle has started.
REMOVE CARD (Card Models Only)
REMOVE CARD flashes when a card is inserted or left
in the reader after a transaction is complete. It will also
flash alternately with ADD TIME when a card is
inserted while a cycle is running or when a card is left
in the reader.
Operation
39
Advertisement
Table of Contents
