Avery Dennison snap 700 Operator's And Service Manual page 83

User's Manual—SNAP™ 700 Printer
board" or "Reset the
BIOS". During the power
up of the printer.
Printer says "Boot Error 3"
or "Hardware error
three" during power up.
Printer requires service.
Corrupted safe
operating system.
Replace the flash disk".
(Message depends on
software version.)
Classification: Avery Dennison - Public
2) Motherboard failure
1) Flash Disk Failure
2) Motherboard Failure
1) Replace motherboard
1) Replace Flash Disk Module
1) Replace motherboard
83