Capturing Screenshots - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
Contents

Capturing screenshots

You can capture screenshots of a Touch controller that is
connected to the video system.
D14908.08 SX20 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Diagnostics > User Interface Screenshots
Capture a screenshot
Click Take screenshot of Touch Panel
capture a screenshot of the Touch controller.
The screenshot will display in the area below
the buttons. Note that it can take up to
30 seconds before the screenshot is ready.
All captured snapshots are included in the list
above the buttons. Click the screenshot ID to
display the image.
System settings
to
www.cisco.com — Copyright © 2012-2014 Cisco Systems, Inc. All rights reserved.
48
Administrator Guide
Setting passwords Appendices
Deleting screenshots
If you want to delete all screenshots,
click Remove all.
To delete just one screenshot, click
×
the button for that screenshot.