Tablet Holder - Skoda yeti Owner's Manual

Tablet holder


Introduction
This chapter contains information on the following subjects:
Attaching the rear headrests
Handle holder
In the holders, external devices (eg. B. Tablet, Smartphone u. Ä.) with a min
size of 122 mm and a max size of 195 mm may be attached.
The maximum permissible load of the compartment is 750 g.
CAUTION
Never exceed the maximum permissible load of the holder - there is a risk of
damage or functional impairment.
Attaching the rear headrests
Fig. 96 Inserting: Adapter / holder
86
Using the system
86
86
Fig. 97 Removing: Holder / Adapter

Read and observe
›
Toinsert, attach the opened adapter to the guide rods of the front headrest
and clip in the direction of arrow
›
Clip in the holder in the direction of arrow
›
To remove, pull on the securing tab
holder in direction of arrow
›
Press the adapter and remove in the direction of the arrow
rods of the headrest.
WARNING
Carefully clip in the adapter - risk of finger injury.
Handle holder
Fig. 98 Tilt and rotate holder
on page 86 first.
» fig. 96 » .
1
into the adapter.
2
in direction of arrow
A
out of the adapter » fig. 97.
4
and take the
3
from the guide
5
