Skoda yeti Owner's Manual page 174

Bulb arrangement in the front headlights

Read and observe and
Arrangement for replacing bulbs
Low beam with halogen bulb or Xenon gas discharge bulb
A
Main beam
B
Changing bulbs for low and main beam (Halogen headlights)
Fig. 198 Replacing the bulb for low beam and main beam

Read and observe and
›
Turn the respective protective cap
and remove.
When removing the cap, make sure that this does not fall into the engine com-
partment.
›
Disconnect the relevant connector with the light bulb in the direction of ar-
row » fig. 198.
1
172
Do-it-yourself
Fig. 197
Left headlight
on page 171 first.
» fig. 197
on page 171 first.
» fig. 197 on page 172 counter-clockwise
›
Remove the connector to the bulb in the direction of arrow
›
Remove the connector.
›
Insert the connector with the new bulb so that the fixing lug
on the bulb into the recess on the reflector.
›
Insert the respective protective cap
wise until it stops.
Notice
We recommend you have the bulb replacement performed by a specialist ga-
rage.
Remove protective guard for fog lights
Fig. 199 Guard: Version 1/version 2

Read and observe and
›
Undo the protective grille in the direction of the arrow
clamp for removing the wheel trims.
›
Remove the protective grille.
.
2
A
» fig. 197 on page 172 and rotate it clock-
on page 171 first.
» fig. 199
» fig. 198 fits
using the