Skoda yeti Owner's Manual page 76

›
Secure the folded forward seat with the aid of the fixing belt to a guide rod
of the head restraint in the front seat
WARNING
The seat backs in occupied rear seats must be properly engaged.
■
When transporting objects in the luggage compartment that has been en-
■
larged by folding the backrest forward, ensure the safety of the passengers
transported on the other rear seats.
The seat backrests must be securely latched in position so that no ob-
■
jects from the luggage compartment can slip into the passenger compart-
ment under sudden braking – There is risk of injury.
CAUTION
When moving the seat backrest the seat belts should not be trapped - there is
a risk of damage to the seat belts.
CAUTION
Before folding the rear middle seat forward, make sure that the storage com-
■
partment, the ashtray and the cup holder in the rear part of the centre console
are closed - risk of damage.
Only keep the seats in the folded forward position for as long as necessary to
■
transport cargo - there is a risk of damaging the front seat backrests. The
seats must be folded back once the cargo has been transported.
If the outer seat is not in the rear end position when folding forward, damage
■
can occur to the locking bolts when unlocking the seat.
Unlocking and removing seats
›
Unlock the folded seat by pressing seat
direction of arrow » fig. 64.
›
Remove the seat on the carrying handle
74
Using the system
» fig. 63.
Fig. 64
Unlocking the folded forward
seat and carrying handles on the
seat surface
locks» fig. 62 on page 73 in the
A
or .
B C
Notice
The outer seats are not mutually interchangeable. In the rear area the left seat
is marked with the letter L and the right seat with the letter R.
Adjusting seats in crosswise direction
›
Remove the middle seat» fig. 64
›
Fold the outer seat forwards and unlock
›
Move the outer seat on the guide towards the middle of the vehicle up to the
stop.
›
Lock the folded forward seat by pressing the seat locks
arrow » fig. 65.
Folding back into the starting position is accomplished in the reverse order.
Folding the seats back into position
›
If the seat has been removed, first position it on the guide and lock it in place
using seat locking » fig. 65 on page 74. Pull the seat upwards to ensure
A
that the seat is locked correctly.
›
Fold the seat in the horizontal position until it can be heard clicking. Check
for yourself that the seat can no longer be lifted by pulling it up.
Fig. 65
Locking seats
on page 74.
» fig. 64 on page 74.
in the direction of
A
Fig. 66
Folding the seat backrest back
into position
