Protective grille for removing fog lights - Park Assist sensor plug
Fig. 200 Guard: Version 1/version 2
Fig. 201 Remove the plug
Read and observe
and
›
Remove the plastic cover for the guard in the direction of the
using the bow to pull the full wheel covers.
›
Remove the remaining part of the grille.
›
Pull the latch out of the connector in the direction of the arrow
›
Undo the latch on the connector in the direction of the arrow
›
Remove the key in the direction of the arrow
Insertion of the ashtray takes place in reverse order.
1)
Applies to vehicles with parking assistance system.
on page 171 first.
arrow» fig. 200
2
.
3
Replacing light bulbs for fog lights
Fig. 202 Remove the number plate light / replace the bulb
Read and observe
First remove the grille for the fog lights
page 173 before changing bulbs.
Removing the headlight
›
Unscrew the screws
›
Raise the headlight in the direction of the arrow
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Pull the plug on the lamp base.
›
Turn the socket with the bulb to the stop in the direction of the arrow
» fig.
202.
3
›
Insert the new socket with the bulb into the headlight and turn to the direc-
tion of arrow
›
Attach the connector on the lamp base.
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» fig.
201.
1
» fig. 202
and tighten.
.
›
Attach the connector on guard carefully
›
Insert the protective grille and carefully press it in.
›
Replace the plastic cover and press into the guard
The protective grille must engage firmly.
and
on page 171 first.
» fig. 199
» fig. 202
with the screwdriver from the tool kit.
A
as far as the stop.
3
» fig. 201
on page 172 and
» fig. 200
on
.
1
.
2
2
on page 173
.
1)
» fig. 200
on page 173
.
1)
173
Fuses and light bulbs