Skoda yeti Owner's Manual page 177

Replacing the bulbs in the tail lamp
Fig. 205 Inner part of the light: Ground light
Fig. 206 Inner part of the light: Light with LED diodes

Read and observe and
Ground light
›
With the spanner from the vehicle tools unscrew the securing screw
» fig. 205.
›
Unlock the bulb holder using the marked area with arrows
move the bulb holder from the light.
›
Turn the respective bulb until it stops counter-clockwise and remove it
B
from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
B
stop.
›
Pull bulb out of the socket and insert a new bulb.
C
›
Insert the bulb holder into the light and screw in the safety screw
» fig. 205 .
A
on page 171 first.
» fig. 205
Light with LED diodes
›
Unlock the bulb holder using the marked area with arrows
move the bulb holder from the light.
›
Turn the respective light bulb
remove it from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the lamp holder in the lamp until it is secure.
A
and re-
» fig. 206
» fig. 206 until it stops counter-clockwise and
Fuses and light bulbs
and re-
175