Changing A Wheel - Skoda yeti Owner's Manual

WARNING
Always properly secure the fire extinguisher, there is a risk of injury in the
event of sudden braking or a vehicle collision.
Vehicle tool kit
Fig. 170 Vehicle tool kit
The box containing the vehicle tool kit is located in the stowage compartment
for the spare wheel, and can be secured with a tape depending on the equip-
ment fitted.
Depending on the equipment, not all of the following components in the on-
board tool kit have to be contained in it.
Screwdriver
1
Key for removing and installing the tail light
2
Top section for the anti-theft wheel bolts
3
Towing eyelet
4
Clamps for removing the wheel trims
5
Jack with sign
6
Wheel wrench
7
Extraction pliers for the wheel bolt caps
8
Breakdown kit
9
156
Do-it-yourself
WARNING
The factory-supplied lifting jack is only intended for your model of vehicle.
■
Under no circumstances attempt to lift other vehicles or loads with it –
there is a risk of injury.
Always securely stow the tool in the box and make sure that it is secured
■
to the spare wheel using the tape - there is a risk of injury in the event of
sudden braking or a vehicle collision.
CAUTION
Screw the jack back to its starting position prior to putting it back in its box -
There is a risk of damage to the box.
Notice
The declaration of conformity is included with the jack or the log folder.

Changing a wheel

Preliminary work
For safety's sake, the following instructions must be observed before
changing a wheel on the road.
›
Park the vehicle as far as possible away from the traffic flow - choose a place
with a flat and firm surface.
›
Switch off the engine.
›
For vehicles with amanual gearbox select 1. gear.
›
On vehicles with anautomatic gearbox place the selector lever in the P posi-
tion.
›
Firmly apply the handbrake.
›
Switch on the hazard warning lights and set up the warning triangle at the
prescribed distance.
›
Have all the occupants get out. The passengers should not stand on the
road while the wheel is being changed (they should remain behind a crash
barrier, for instance).
›
Uncouple any trailers.
Changing a wheel
›
Remove the spare wheel » page
›
Remove the full wheel trim » page 157
›
First of all, slacken the anti-theft wheel bolt
the other wheel bolts » page 158
157.
or caps » page 158.
» page 158and then loosen all
» .
