15.10 Divider - Furuno FCR-2119-BB Operation Manual

15. NAVIGATION TOOLS

15.10 Divider

The divider performs the following calculations:
• Range and bearing between two points
• TTG between two points
• Total TTG from start to end
• Total distance from start to end
The divider is available in the Voyage navigation and Voyage planning modes. Only
one divider can be displayed. The divider is neither saved nor shared among other
units (FMD-3x00, FCR-2xx9 or FAR-3xx0).
15.10.1 How to use the divider
Do as shown below to use the divider.
Select [New
Divider]
00:00
00:00
Starting point
How to delete points
Point(s) can be deleted. Put the cursor on a point, right click, then select [Delete Points] from
the pop-up menu. The point(s) deleted depends on the point selected.
End point
Delete end point
15-14
Right-click
starting point
00:32
00:32
5.9NM
5.0NM
051.2°
- TTG to point - TTG to point - TTG to point
- Total TTG - Total TTG - Total TTG
- Total distance - Total distance - Total distance
Distance and bearing Distance and bearing Distance and bearing
between points between points between points
Drag circle to
next point
2.6NM
055.1°
00.00
00.00
Intermediate point
Delete
intermediate
point
Divider appears.
00.00
00.00
Connecting
points are
deleted.