Furuno FCR-2119-BB Operation Manual page 464

24. CONNING DISPLAYS
Conning display Status bar
No. Button
1 Operating mode
2 Conning display
sheet
3 [SILENT]
4 [TOOL]
5
6
7
8
9 Date
10 Time
24-2
Selects the operating mode, [RADAR], [CHART for RADAR] or [CON-
NING].
Selects the conning display sheet to use, Sheet.1 - Sheet.6. (Sheet name
is decided at installation. "Sheet x" (x=sheet number) is the default sheet
name.)
Goes to the [SILENT] mode. See section 6.7.
Shows, hides the software keyboard; adjusts the volume of the key beep
and audio alert.
Shows, hides
software keyboard
Adjusts volume of
key beep, audio
alert
Selects a display palette. See section 1.5.
Adjusts the brilliance of a the monitor. See section 1.6.
Takes a screenshot. See section 1.21.
Displays AMS and conning software version and system information. The
information shown in the figure may differ from your own. See
section 1.24.
See section 1.20.
See section 1.20.
Description
To adjust a
volume, put
cursor in
applicable
box.
Display example
Volume setting
Click up arrow
to raise volume;
down arrow to
lower volume.