Installing Optional Equipment; Gyro Converter Gc-10 - Furuno FCR-2127 Installation Manual

4. INSTALLING OPTIONAL
EQUIPMENT
4.1

Gyro Converter GC-10

The Gyro Converter GC-10, incorporated inside the processor unit, converts analog
gyrocompass reading into digital coded bearing data for display on the radar screen.
This section explains how to install the GC-10 (mainly consisting of the GYRO
CONVERTER board) and set it up according to gyrocompass connected.
Installing the GYRO CONVERTER board
Necessary Parts: GC-10-2 (Code number 000-080-440)
See packing list for details at the back of this manual.
1. Open the processor unit.
Processor unit (Opened)
4-1