Appendix 3 Data Color And Meaning - Furuno FCR-2119-BB Operation Manual

APPENDIX 3 DATA COLOR AND
MEANING
Indication
color
GRN
SYSTEM
YEL
RED
GRN
(***.*)
GRN
LOCAL
YEL
RED
GRN
(***.*)
YEL
MANUAL
* 1 "S" only (IEC 61162-1 ED.4) using RMC and GNS sentences. *
* 3 "V" only (IEC 61162-1 ED.4) using RMC and GNS sentences. *
5
* "CORR1" replaces "MAN" when heading correction is applied.
AP-22
Sensor
HDG
color
GNS-A,D,F,P,R
WHT THS-A
HDT GGA-1,2,3,4,5
GLL-A,D and (status: A)
RMC-A,D,F,P,R
and (status: A)
WHT RAIM error in GBS sentence is
greater than 10 m and DGPS update
interval in GGA, GNS sentence is
higher than 10 s.
RED GNS-E("YEL"),M,S
GGA-6("YEL"),7,8
GLL-E("YEL"),M,S and Status: V
GGA-E,M,S and Status: V
RMC-E,M,S and Status: V
GGA and GNS sentence DGPS update
interval is 30 s or more.
WHT Sentence not input when: GNS-N,
THS-E,M,
sentence not
incorrect value
input if S,N or
GGA-N, incorrect value
HDT has
GLL-N, incorrect value and Status: V
incorrect
RMC-N, incorrect value and Status: V
value
GNS-A,D,F,P,R
WHT THS-A
HDT GGA-1,2,3,4,5
GLL-A,D and (status: A)
RMC-A,D,F,P,R
and (status: A)
WHT RAIM error in GBS sentence is
greater than 10 m and DGPS update
interval in GGA, GNS sentence is
higher than 10 s.
RED GNS-E("YEL"),M,S
GGA-6("YEL"),7,8
GLL-E("YEL"),M,S and Status: V
GGA-E,M,S and Status: V
RMC-E,M,S and Status: V
GGA and GNS sentence DGPS update
interval is 30s or more.
WHT Sentence not input when: GNS-N,
THS-E,M,
incorrect value
sentence not
GGA-N, incorrect value
input if S,N or
GLL-N, incorrect value and Status: V
HDT has
RMC-N, incorrect value and Status: V
incorrect
value
YEL Manual setting value
Manual
setting (Dead Reckoning)
(MAN)
(DR)
L/L SPD
VBW-A VTG-A,D,P
VHW
*1
*2
VBW-V VTG-E,M,S
(Sentence
name
remains
yellow even if
switching
from A to V.)
Sentence not Sentence not input
input when: when:
VBW or VHW VTG-N, incorrect
has incorrect value or RMC-N,
value
incorrect value
*3
VBW-A VTG-A,D,P
VHW
*1
*2
VBW-V VTG-E,M,S
(Sentence
name
remains
yellow even if
switching
from A to V.)
Sentence not Sentence not input
input when:
when:
VBW or VHW
VTG-N, incorrect
has incorrect
value or RMC-N,
value
incorrect value
*3
Manual
setting
value
2 "C" and "U" only (IEC 61162-1 ED.4) using RMC and GNS sentences.
4 "V" only (IEC 61162-1 ED.4) using RMC sentence.
COG/SOG Display example
All values in green.
Position shown
in yellow.
SPD, COG, SOG and POSN
values and pos. source name
in red.
HDG value shown
*4
with asterisks.
Same as corresponding
indication in SYSTEM.
Same as corresponding
indication in SYSTEM.
Same as corresponding
indication in SYSTEM.
Same as corresponding
indication in SYSTEM.
*4
HDG, SPD and POSN values
and "MAN" * 5 in
yellow characters.