How To Set Vrm Attributes - Furuno FCR-2119-BB Operation Manual

Hide thumbs Also See for FCR-2119-BB:

Table of Contents

2. RADAR, CHART RADAR OPERATION

3. To anchor the VRM, push the left button.

To turn off a VRM, click the arrow in the applicable VRM box. The VRM disappears

and the VRM box is minimized.

How to set VRM attributes

You can customize the VRMs to suit your needs.

1. Open the menu then select [3 NAV TOOL] and [2 EBL•VRM] (B type) or [2

EBL•VRM•CURSOR] (IMO and A types) to display the [EBL•VRM] menu

(EBL•VRM•CURSOR menu for the IMO and A types).

2. For the B-type radar, select [3 VRM1] or [4 VRM2] as appropriate. Spin the

scrollwheel to select desired unit then push the left button.

3. Select [6 VRM TTG] and then select the VRM(s) that are to show/hide the TTG

indication. [OFF] shows no TTG indication.

4. The [LINK EBL] option for [7 VRM OFFSET] automati-

cally activates the corresponding VRM when the offset

EBL is enabled.

5. Close the menu.

IMO- and A-type radars

B-type radar

Show Quick Links

Table of Contents