How To Turn Nav Data On/Off - Furuno FCR-2119-BB Operation Manual

2. RADAR, CHART RADAR OPERATION
2.27.3

How to turn NAV data on/off

Wind, depth, ocean current, water temperature, date and time and waypoint data may
be set up as follows:
1. Open the menu then select [4 INFORMATION BOX].
2. Select [2 SET NAV DATA].
3. Set up the nav data referring to the table below.
Item
[1 DEPTH]
[2 DEPTH GRAPH SCALE] Selects depth scale range. The depth for the last 30 minutes is plotted
[3 DEPTH MARK]
[4 CURRENT]
[5 WIND]
[6 WIND STAB]
[7 TEMPERATURE]
Note: Appropriate sensors are required to display any data. The wind vector
shows a direction from which the wind blows in, relative to own ship heading, and
is labeled "T *". Wind velocity is a true wind speed as a result of compensating for
own ship's speed and orientation. Ocean current (tide) is shown relative to bow in
head-up, cursor gyro and course-up, and reference to North in north-up and true
motion.
4. Close the menu.
2-40
Selects unit of depth measurement, or turn depth indication OFF.
with a yellow line. The [AUTO] setting automatically adjusts the scale
according to depth.
Selects the depth at which to show the depth mark.
Turns the current (tide) display ON (current relative to North) or OFF.
Selects the unit of wind speed measurement.
Selects Wind vector format, among three choices:
[APPARENT]: Apparent wind measured by wind meter, with ship's
bow as reference.
[NORTH]: Apparent wind minus ship's movement, with North as refer-
ence.
[THEORETICAL]: Apparent wind minus ship's movement, with ship's
bow as reference.
Turns water temperature indication ON or OFF and selects the unit of
measurement.
Description