Installing Optional Equipment; Gyro Converter Gc-10 - Furuno FCR-2829W Installation Manual

4. INSTALLING OPTIONAL EQUIP-
MENT
4.1

Gyro Converter GC-10

The Gyro Converter GC-10, incorporated inside the radar processor unit, convents
analog gyrocpmpass reading into digital coded bearing data for display on the radar
screen.
This section explains how to install the GC-10 (mainly consisting of the GYRO CON-
VERTER board) and set it up according to gyrocompass connected.
4.1.1 Installing the GYRO CONVERTER board
Necessary parts: GC-10-2 (Code number: 000-080-440)
1. Open the processor unit.
Radar processor unit (opened)
4-1