Adjustments and Tests
Returning the Printer to Normal Operation
When you have finished servicing the printer, return it to service by doing the
following steps:
1. Load paper.
2. Connect the data (signal) cable(s) to the printer interface.
3. Plug the AC power cord into the printer and the power source.
4. Close the cabinet doors and the printer cover.
5. Set the printer power switch to | (on).
6. Test printer operation by selecting and running one of the operator print
tests. (See page 155.)
7. Select the emulation. (Refer to the User's Manual.)
8. Set the top-of-form. (Refer to the User's Manual.)
179