Paper Out Sensor - Printronix P8000 SERIES Maintenance Manual

Appendix E

Paper Out Sensor

Screw (4)
Left Cover
Plate
A
Tie
Wrap
Figure 11. Replacing the Paper Out Sensor Assembly
Removal
1. Prepare the printer for maintenance (page 440).
2. Remove the screw and left cover plate. (See Figure 11.)
3. Cut and remove the tie wraps from the tie wrap holes to free the paper out
sensor cable.
4. Trace the paper out sensor cable back to the adaptor cable assembly
(256480-001) located at the back of the Mech Assy.
5. Disconnect connector J11 from P11.
6. Remove the sensor knob, paper out sensor, and paper out sensor cable.
450
Paper Out
Sensor Cable
J10
Tie Wraps (5)
A
Sensor Knob
Adaptor Cable
Assembly
P11
P10
J10
Harness
Connector
Paper Out
Sensor