Factory Menu - Printronix P8000 SERIES Maintenance Manual

Factory Menu

Printer software contains a Factory menu that you can access by holding
down the four arrow keys when the printer is in the offline state. This menu is
not intended for the end user, but is used by manufacturing and maintenance
personnel to set or change certain operational perameters.
The factory menu is a multi-level menu that operates the same way as the
user menus. The menu structure is shown in Figure 12 on page 166.
IMPORTANT If you do not know the purpose of a setting or value in the Factory Menu,
DO NOT change it. Default menu values set at the factory are indicated
by an asterisk ( * ) next to the value.
Entering the Factory Menu
1. Plug the AC power cord into the printer and the power source.
2. Power on the printer.
3. The printer must be offline to do this procedure. If the printer is online,
4. On the control panel, press the
5. Press
6. Before exiting the factory menu, press the
Exiting the Factory Menu
Press ONLINE to exit the Factory menu.
press the ONLINE key. "OFFLINE" will display.
"ENTER SWITCH UNLOCKED" briefly displays. (If "LOCKED" displays,
simply press + again. This is the default key combination. The lock/
unlock key combination can be programmed by the user. If
not unlock the ENTER key, get the new key combination from the user.)
+ + +
the same time.) "Factory / Set Coil Temp" appears on the display. Menu
options are shown in Figure 12.
key.
+ keys to unlock the ENTER key.
to enter the factory menu. (Press all four keys at
+
+ does
keys to lock the ENTER
165