Emerson X-STREAM Series Instruction Manual page 69

Instruction Manual
HASXENE-IM-EX
12/2014
SETUP enables several additional confi gu-
rations, e.g.
• 2 pages measurement display
• different font sizes
The very fi rst display line shows
• a fl ashing heart, showing the instrument is
operating
• one or more status pictograms, if ( NAMUR)
status are active. Some of these are explai-
ned by a text message in the last line
• a channel indicator, if the current menu
page is related to a specifi c channel only.
The display´s bottom line shows plain text
status information (errors, maintenance
requests, function checks or off-spec perfor-
mance).
Active messages are stored in an internal
buffer. If there is more than one message in
the buffer, the display will cycle through.
Most messages also activate a NAMUR relay
(if a relay has been assigned to that NAMUR
function; X-STREAM XE instruction ma-
nual).
Note!
There are also functions, that do activate a
relay, but are not shown on the display. In
such cases, check the status menu for more
information.
Emerson Process Management GmbH & Co. OHG
X-STREAM Non-Incendive
3.7 Powering Up
Ch1
Ch2
Ch3
Ch4
4 lines display
Input
Ch1
Output
Ch2
Flow 1
2 lines display with additional se-
condary parameter line
MEASUREMENT DISPLAY
1.000
ppm
CO
500
ppm
CO
2.400
ppm
CO
1.900
ppm
CO
10.0000
ppm
CO
10.0000
ppm
CO
0.00 l/min
3-13