Standards; A.3 Standards - Siemens PM240-2 Hardware Installation Manual

Appendix

A.3 Standards

A.3

Standards

European Low Voltage Directive
The SINAMICS G120 product series meets the requirements of the Low-Voltage Directive
2006/95/EC. The devices are certified that they comply with the following standards:
● EN 61800-5-1 - Electrical power drive systems with adjustable speed
European Machinery Directive
Power Modules FSA ... FSC comply with the requirements of the Machinery Directive
2006/42/EC, if they are operated with a Control Unit that supports the safety functions.
Power Modules FSD ... FSF comply with the requirements of the Machinery Directive
2006/42/EC, independent of the Control Unit.
European EMC directive 2004/108/EG
When installed according to the recommendations described in this manual, the inverters
fulfill all requirements of the EMC Directive as defined by the EMC Product Standard for
Power Drive Systems EN 61800-3.
ISO 9001
Siemens I DT MC operates a quality management system which complies with the
requirements of ISO 9001.
Underwriters Laboratories
The device is listed by UL and CUL for power conversion in an environment with the
pollution degree 2.
The inverters are UL approved (Underwriters Laboratories).
Frame sizes FSA ... FSC are tested according to standards UL508C and CSA22.2 No. 14.
Frame sizes FSD ... FSF are tested according to standards UL61800-5-1 and CSA 22.2 No.
274.
SEMI F47
Specification for semiconductor process equipment voltage drop immunity
SINAMICS G120 Power Modules PM240-2 meet the requirements of the standard SEMI
F47-0706.
KC (Korea)
Inverters with the KC marking satisfy EMC requirements for South Korea.
values in South Korea (Page 98).
126
Hardware Installation Manual, 12/2015, A5E33294624B AD
EMC limit
Power Module PM240-2