ABB Relion 670 series Engineering Manual page 94

Section 9
DNP3 communication engineering
88
IEC08000336 V1 EN
Figure 66: CMT: Context menu in DNP3 window
2. The selection window shows the number of signals selected, see
IEC08000363 V1 EN
Figure 67: CMT: Set Index menu
3. Define the Starting index for this group and click OK.
Procedure to set class configuration:
1. Click in the class field of the signal to change the class configuration.
2. The Select Class window opens.
3. Make the selection according to the definitions in the project and click OK to
close the window and get the new configuration, see
IEC08000338 V1 EN
Figure 68: CMT: Select Class window
IEC08000336.vsd
IEC08000338.vsd
1MRK511240-UEN B
Figure 67.
IEC08000363.vsd
Figure 68.
670 series
Engineering Manual