ABB Relion 670 series Engineering Manual page 21

1MRK511240-UEN B
670 series
Engineering Manual
• The engineering steps are protocol dependent.
• Use the communication management tool (CMT) for DNP3 engineering.
• Use the IET600 station configuration tool for IEC 61850 engineering.
See the application manual for other protocols (LON, SPA, IEC103).
The IED restarts automatically when writing an IED configuration
where changes have been made to, for example, configuration
parameters. It is not possible to communicate with the IED during
the restart.
Section 3
Engineering process
15