ABB Relion 670 series Engineering Manual page 43

1MRK511240-UEN B
670 series
Engineering Manual
IEC09000718 V1 EN
Figure 24: PCM600: IED Template Properties
5. Click Delete Template to delete the template, click Import Template to import
a template from the selection window or click Create to insert the selected IED
to the bay, see Figure
It is possible to insert more than one IED from the Create New
Object from Template window and the selection window
remains open until the user clicks Close.
Inserting a pre-configuration
Pre-configurations in PCM600 are available as *.pcmi files and include all
information that is related to the IED object in PCM600. The pre-configuration is
bound to a specific hardware configuration.
Two alternatives to insert a pre-configuration:
• Use the pre-configuration that has been ordered together with the IED.
• Create an own configuration, export the configuration as *.pcmi file and use it
to configure other IEDs.
23.
Section 4
Setting up a project
IEC09000718-1-en.vsd
37