Configuring Qos Queue And Class Setup - ZyXEL Communications VMG5313-BXB SERIES User Manual

Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the VMG's Web Configurator in advanced mode.
1
Click Network Setting > Routing.
2
Click Add new Static Route in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Select the Active check box. Enter the Route Name as R.
4a
Set IP Type to IPv4.
4b
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4c
Select Enable in the Use Gateway IP Address field. Type 192.168.1.253 (R's N1 address)
4d
in the Gateway IP Address field.
Select VDSL/ppp1.1 as the Use Interface.
4e
Click OK.
4a
Now B should be able to receive traffic from A. You may need to additionally configure B's firewall
settings to allow specific traffic to pass through.

4.6 Configuring QoS Queue and Class Setup

This section contains tutorials on how you can configure the QoS screen.
Chapter 4 Tutorials
IP ADDRESS
192.168.1.253
192.168.10.2
192.168.10.33
VMG5313-BXB Series User's Guide
47