ZyXEL Communications VMG5313-BXB SERIES User Manual page 226

Table 102 VoIP > SIP > SIP Service Provider > Add new provider/Edit (continued)
LABEL DESCRIPTION
SIP Server Enter the IP address or domain name of the SIP server provided by your VoIP service
Address provider. You can use up to 95 printable ASCII characters. It does not matter whether the
SIP server is a proxy, redirect or register server.
SIP Server Port Enter the SIP server's listening port number, if your VoIP service provider gave you one.
Otherwise, keep the default value.
REGISTER Enter the IP address or domain name of the SIP register server, if your VoIP service provider
Server Address gave you one. Otherwise, enter the same address you entered in the SIP Server Address
field. You can use up to 95 printable ASCII characters.
REGISTER Enter the SIP register server's listening port number, if your VoIP service provider gave you
Server Port one. Otherwise, enter the same port number you entered in the SIP Server Port field.
SIP Service Enter the SIP service domain name. In the full SIP URI, this is the part after the @ symbol.
Domain You can use up to 127 printable ASCII Extended set characters.
RFC Support
RFC PRACK (RFC 3262) defines a mechanism to provide reliable transmission of SIP provisional
3262(Require: response messages, which convey information on the processing progress of the request.
100rel) This uses the option tag 100rel and the Provisional Response ACKnowledgement (PRACK)
method.
Select this to have the the peer device require the option tag 100rel to send provisional
responses reliably.
VoIP IOP Flags Select the VoIP inter-operability settings you want to activate.
Replace dial Replace a dial digit "#" with "%23" in the INVITE messages.
digit '#' to
'%23' in SIP
messages
Remove ':5060' Remove ":5060" and "transport=udp" from the "Request-URI" string in the REGISTER and
and INVITE packets.
'transport=udp'
from request-
uri in the in-
dialog outgoing
SIP request
Remove the Remove the 'Route' header in SIP packets.
'Route' header
in SIP
messages
Don't send re- Do not send a re-Invite packet to the remote party when the remote party answers that it
Invite to the can support multiple codecs.
remote party
when there are
multiple codecs
answered in the
SDP
Bound Interface Name
Bound If you select LAN or Any_WAN, the VMG automatically activates the VoIP service when any
Interface Name LAN or WAN connection is up.
If you select Multi_WAN, you also need to select two or more pre-configured WAN
interfaces. The VoIP service is activated only when one of the selected WAN connections is
up.
Outbound Proxy
Chapter 22 Voice
VMG5313-BXB Series User's Guide
226