Before You Begin; The Broadband Screen - ZyXEL Communications VMG5313-BXB SERIES User Manual

Figure 18 Dual Stack Lite
LAN
- IPv6
- IPv4
+ IPv4
IPv6

6.1.3 Before You Begin

You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.

6.2 The Broadband Screen

Use this screen to change your VMG's Internet access settings. Click Network Setting >
Broadband from the menu. The summary table shows you the configured WAN services
(connections) on the VMG.
Figure 19 Network Setting > Broadband
The following table describes the labels in this screen.
Table 7 Network Setting > Broadband
LABEL
Add New WAN
Interface
#
Name
Type
Mode
Encapsulation
802.1p
Chapter 6 Broadband
WAN
- IPv6
- IPv4 in IPv6
ISP (IPv6)
IPv4 in IPv6
DESCRIPTION
Click this button to create a new connection.
This is the index number of the entry.
This is the service name of the connection.
This shows whether it is an ATM, Ethernet or a PTM connection.
This shows whether the connection is in routing or bridge mode.
This is the method of encapsulation used by this connection.
This indicates the 802.1p priority level assigned to traffic sent through this connection. This
displays N/A when there is no priority level assigned.
VMG5313-BXB Series User's Guide
IPv6
AFTR
IPv4 Internet
66
IPv6 Internet