The Qos Screen; The Qos Queue Setup Screen - ZyXEL Communications P8701T User Manual

8.3 The QoS Screen

Click Wireless network > Classic configuration > Advanced Setup > QoS to open the screen
shown next. Use this screen to enable or disable QoS and set the default DSCP mark for outgoing
packets that do not match any classification rules.
Figure 45 QoS
The following table describes the labels in this screen.
Table 39 QoS
LABEL
QoS
Select Default
DSCP Mark
Apply/Save

8.4 The QoS Queue Setup Screen

Click Wireless network > Classic configuration > Advanced Setup > QoS > QoS Queue to
open the screen shown next. Use this screen to configure QoS queue assignment.
Basic Home Station VDSL2 P8701T User's Guide
DESCRIPTION
Select the Enable check box to turn on QoS to improve your network performance.
Set the default DSCP (DiffServ Code Point) value for outgoing packets that do not match
any classification rules.
Click this to save your changes.
Chapter 8 Quality of Service (QoS)
127