ZyXEL Communications VMG5313-BXB SERIES User Manual page 27

Table 3 Navigation Panel Summary (continued)
LINK TAB
Home LAN Setup
Networking
Static DHCP
UPnP
Additional
Subnet
STB Vendor ID
Wake on Lan
TFTP Server
Name
Routing Static Route
DNS Route
Policy Route
RIP
QoS General
Queue Setup
Classification
Setup
Shaper Setup
Policer Setup
NAT Port Forwarding
Applications
Port Triggering
DMZ
ALG
Address Mapping Use this screen to change your VMG's address mapping settings.
Sessions
DNS DNS Entry
Dynamic DNS
IGMP/MLD
Vlan Group Vlan Group
Interface
Grouping
USB Service File Sharing
Media Server
Chapter 2 The Web Configurator
FUNCTION
Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Use this screen to assign specific IP addresses to individual MAC
addresses.
Use this screen to turn UPnP and UPnP NAT-T on or off.
Use this screen to configure IP alias and public static IP.
Use this screen to configure the Vendor IDs of the connected Set Top
Box (STB) devices, which have the VMG automatically create static
DHCP entries for the STB devices when they request IP addresses.
Use this screen to remotely turn on a device on the local network.
Use DHCP option 66 to identify a TFTP server name.
Use this screen to view and set up static routes on the VMG.
Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).
Use this screen to configure policy routing on the VMG.
Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Use this screen to configure QoS queues.
Use this screen to define a classifier.
Use this screen to limit outgoing traffic rate on the selected interface.
Use this screen to configure QoS policers.
Use this screen to make your local servers visible to the outside
world.
Use this screen to configure servers behind the VMG.
Use this screen to change your VMG's port triggering settings.
Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
Use this screen to enable or disable SIP ALG.
Use this screen to configure the maximum number of NAT sessions
each client host is allowed to have through the VMG.
Use this screen to view and configure DNS routes.
Use this screen to allow a static hostname alias for a dynamic IP
address.
Use this screen to configure multicast settings (IGMP for IPv4 and
MLD for IPv6 multicast groups) on the WAN.
Use this screen to group and tag VLAN IDs to outgoing traffic from
the specified interface.
Use this screen to map a port to a PVC or bridge group.
Use this screen to enable file sharing via the VMG.
Use this screen to use the VMG as a media server.
VMG5313-BXB Series User's Guide
27