Table of Contents
Advertisement
Click Apply to save your settings.
3
Figure 51 Network Setting > Home Networking > LAN Setup
The following table describes the fields in this screen.
Table 31 Network Setting > Home Networking > LAN Setup
LABEL
DESCRIPTION
Interface Group
Group Name
Select the interface group name for which you want to configure LAN settings. See
15 on page 184
LAN IP Setup
IPv4 Address
Enter the LAN IPv4 IP address you want to assign to your VMG in dotted decimal notation,
for example, 192.168.1.1 (factory default).
Subnet Mask/
Type the subnet mask of your network in dotted decimal notation, for example
Prefix Length
255.255.255.0 (factory default). Your VMG automatically computes the subnet mask based
on the IP Address you enter, so do not change this field unless you are instructed to do so.
IGMP Snooping
Status
Select the Enable IGMP Snooping checkbox to allows the VMG to passively learn multicast
group.
Chapter 8 Home Networking
for how to create a new interface group.
VMG5313-BXB Series User's Guide
123
Chapter
Advertisement
Table of Contents
