ZyXEL Communications VMG5313-BXB SERIES User Manual page 274

SNMP itself is a simple request/response protocol based on the manager/agent model. The
manager issues a request and the agent returns responses using the following protocol operations:
• Get - Allows the manager to retrieve an object variable from the agent.
• GetNext - Allows the manager to retrieve the next object variable from a table or list within an
agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it
initiates a Get operation, followed by a series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.
Click Maintenance > SNMP to open the following screen. Use this screen to configure the VMG
SNMP settings.
Figure 162 Maintenance > SNMP
The following table describes the fields in this screen.
Table 133 Maintenance > SNMP
LABEL DESCRIPTION
SNMP Agent Select Enable to let the VMG act as an SNMP agent, which allows a manager station to
manage and monitor the VMG through the network. Select Disable to turn this feature
off.
Get Community Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station.
Set Community Enter the Set community, which is the password for incoming Set requests from the
management station.
Trap Community
Enter the Trap Community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
System Name Enter the SNMP system name.
System Location Enter the SNMP system location.
System Contact Enter the SNMP system contact.
Trap Destination Type the IP address of the station to send your SNMP traps to.
Apply Click this to save your changes back to the VMG.
Cancel Click this to restore your previously saved settings.
Chapter 34 SNMP
VMG5313-BXB Series User's Guide
274