ZyXEL Communications VMG5313-BXB SERIES User Manual page 20

Wireless n vdsl2 iad with usd
Hide thumbs Also See for VMG5313-BXB SERIES:
Table of Contents

Advertisement

Figure 4 LEDs on the VMG
None of the LEDs are on if the VMG is not receiving power.
Table 1 LED Descriptions
LED
COLOR
Green
Power
Red
Green
DSL
Green
Internet
Red
Green
Ethernet
WAN
Orange
Green
LAN1~4
Green
WLAN/WPS
Orange
Green
Phone1,
Phone2
Orange
Chapter 1 Introducing the VMG
STATUS
DESCRIPTION
On
The VMG is receiving power and ready for use.
Blinking
The VMG is self-testing.
On
The VMG detected an error while self-testing, or there is a device
malfunction.
Off
The VMG is not receiving power.
On
The VDSL line is up.
Blinking
The VMG is initializing the VDSL line.
Off
The DSL line is down.
On
The VMG has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking
The VMG is sending or receiving IP traffic.
Off
There is no Internet connection or the gateway is in bridged mode.
On
The VMG attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
On
The VMG has a successful 1000 Mbps Ethernet connection on the WAN.
Blinking
The VMG is sending or receiving data to/from the WAN at 1000 Mbps.
On
The VMG has a successful 10/100 Mbps Ethernet connection on the
WAN.
Blinking
The VMG is sending or receiving data to/from the WAN at 10/100 Mbps.
Off
There is no Ethernet connection on the WAN.
On
The VMG has a successful 1000 Mbps Ethernet connection with a device
on the Local Area Network (LAN).
Blinking
The VMG is sending or receiving data to/from the LAN at 1000 Mbps.
Off
The VMG does not have an Ethernet connection with the LAN.
On
The 2.4 GHz wireless network is activated.
Blinking
The VMG is communicating with 2.4 GHz wireless clients.
Blinking
The VMG is setting up a WPS connection with a 2.4 GHz wireless client.
Off
The 2.4 GHz wireless network is not activated.
On
A SIP account is registered for the phone port.
Blinking
A telephone connected to the phone port has its receiver off of the hook
or there is an incoming call.
On
A SIP account is registered for the phone port and there is a voice
message in the corresponding SIP account.
Blinking
A telephone connected to the phone port has its receiver off of the hook
and there is a voice message in the corresponding SIP account.
Off
The phone port does not have a SIP account registered.
VMG5313-BXB Series User's Guide
20

Advertisement

Table of Contents
loading

Table of Contents