ZyXEL Communications VMG5313-BXB SERIES User Manual page 46

In the following figure, router R is connected to the VMG's LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1
network) to computer B (in N2 network), the traffic is sent to the VMG's WAN default gateway by
default. In this case, B will never receive the traffic.
N1
A
You need to specify a static routing rule on the VMG to specify R as the router in charge of
forwarding traffic to N2. In this case, the VMG routes traffic from A to R and then R routes the
traffic to B.
N1
A
This tutorial uses the following example IP settings:
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER
The VMG's WAN
The VMG's LAN
IP Type
Use Interface
A
Chapter 4 Tutorials
R
R
IP ADDRESS
172.16.1.1
192.168.1.1
IPv4
VDSL/ppp1.1
192.168.1.34
VMG5313-BXB Series User's Guide
46
N2
B
N2
B