Wds Scan - ZyXEL Communications VMG5313-BXB SERIES User Manual

Table 26 Network Setting > Wireless > WDS (continued)
LABEL
MAC Address
Modify
Scan
Apply
Cancel

7.7.1 WDS Scan

You can click the Scan icon in Wireless > WDS to have the VMG automatically search and display
the available APs within range. Select an AP and click Apply to have the VMG establish a wireless
link with the selected wireless device.
Figure 40 WDS: Scan
The following table describes the labels in this screen.
Table 27 WDS: Scan
LABEL
Wireless Bridge Scan Setup
Refresh
#
SSID
BSSID
Apply
Cancel
Chapter 7 Wireless
DESCRIPTION
This shows the MAC address of the peer device.
You can connect to up to 4 peer devices.
Click the Edit icon and type the MAC address of the peer device in a valid MAC address
format (six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to remove this entry.
Click the Scan icon to search and display the available APs within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click Refresh to update the table.
This is the index number of the entry.
This shows the SSID of the available wireless device within range.
This shows the MAC address of the available wireless device within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG5313-BXB Series User's Guide
103