Operators Responsibility For Maintenance; General Maintenance Hints; Maintenance And Inspection Schedule; Owners Annual Inspection Record - Skyjack SJ-7027 Operating, Maintenance And Parts Manual

OPERATOR'S RESPONSIBILITY FOR
MAINTENANCE
Death or injury can result if the work platform is not kept
in good working order. Inspection and maintenance
should be performed by competent personnel who are
familiar with mechanical procedures.
The operator should be assured that the work platform
has been properly maintained before using it. Included
in this section is information on lubrication and
inspection points that require maintenance.
Even if the operator is not responsible for the
maintenance of this work platform, the operator should
perform the daily inspections found in
Maintenance and Inspection
IMPORTANT NOTE
Replace all worn or damaged parts or labels
discovered during this inspection. Any problems or
malfunctions that may affect the safe operation of this
work platform MUST be repaired immediately.
DANGER
CRUSHING HAZARD
DO NOT reach through scissors assembly without the
safety bar properly positioned.
hazard will result in death or serious injury
SECTION 5, Page 2
Table 2-4.
Schedule.
Failure to avoid this
!
June 2001
MAINTENANCE AND INSPECTION
SCHEDULE
The actual operating environment of the work platform
governs the use of the maintenance schedule. The
inspection points covered in
and Inspection Schedule
work platform to be checked and the intervals at which
they should be checked.
OWNER'S ANNUAL INSPECTION
RECORD
It is the responsibility of the owner to arrange daily,
weekly, monthly and annual inspections of the work
platform. Table 2-1. Owner's Annual Inspection Record
in section 2 is to be used for recording the date of
inspection, owner's name and the person responsible
for the inspection of this work platform.

GENERAL MAINTENANCE HINTS

• Before attempting any repair work, disconnect
battery ground negative (-) lead.
• Properly position safety bar if the scissors
assembly is raised.
• Preventive maintenance is the easiest and least
expensive type of maintenance.
SJ-600 Series Engine Powered
Table 2-4. Maintenance
indicates the areas of the
112715