Hydraulic Generator Control (Option); 1500W Ac Inverter (Option); Powered Extension Platform Control Box (Option) - Skyjack SJ-7027 Operating, Maintenance And Parts Manual

Hydraulic Generator Control (Option)

1
Figure 2-6. Hydraulic Generator Control
Hydraulic Generator Control - Located on the side of
the Operator's Control Box, this push-button switch
starts the hydraulic generator on the base.
1. Hydraulic generator Off/On Push-Button Switch
This illuminated push-button switch starts the base
mounted generator.
generator is activated.

1500W AC Inverter (Option)

2
1
Figure 2-7. 1500W AC Inverter
Inverter - The inverter is located on the base of the
machine, it has the following controls.
1. ON/OFF Switch - This slide switch will activate or
terminates inverter function.
2. Status LEDs - These LEDs indicate the operating
or fault status of the inverter .
3. 15 Amp Circuit Breaker - In the event of a power
overload or circuit grounding, this circuit breaker will
pop out.
4. GFCI Outlet - During inverter operation, this
outlet provides AC power.
SECTION 2, Page 4
It illuminates when the
3
4
June 2001
Powered Extension Platform
Control Box (Option)
1
Figure 2-8. Powered Extension Platform Control Box
Powered Platform Control Box - This metal control
station is mounted at the right front of the extension
platform. It contains the following controls:
1. Enable Switch - This switch, when activated
brings power to the Platform Extend/Retract Switch.
2. Platform Extend/Retract Switch - This switch,
when activated extends/retracts the powered exten-
sion platform.
SJ-600 Series Engine Powered
2