Operating Controls Identification; Base Controls; Electrical Panel; Section 2 - Operation - Skyjack SJ-7027 Operating, Maintenance And Parts Manual

Operating Controls Identification

The following descriptions are for identification,
explanation and locating purposes only. A qualified
operator MUST read and completely understand
these descriptions before
platform. Procedures for operating this work platform
are detailed in the "OPERATING PROCEDURES"
section. Both standard and optional controls are
identified in this section. Therefore, some controls
may be included that are not furnished on your work
platform.

Base Controls

Electrical Panel

Figure 2-1. Electrical Panel
Electrical Panel - This control station is located in the
Hydraulic/Electric Side Cabinet.
following controls:
1. Up Push-Button Switch - This push-button switch
will raise the platform to desired height.
2. Down Push-Button Switch - This push-button
switch will lower the platform to desired height.
3. Hour meter - This gauge records engine running
time.
4. 20 Amp Circuit Breaker Resets - In the event of
a power overload or positive circuit grounding, circuit
breaker will pop out.
SJ-600 Series Engine Powered
toc 1 3 4
SECTION 2
OPERATION
operating this work
3
1
2
4
It contains the
June 2001
5 6
Emergency Battery Disconnect Switch
1
Figure 2-2. Emergency Battery Disconnect Switch
1. Emergency Battery Disconnect Switch Located
at the front of the Hydraulic/Electric Side Cabinet, this
switch when in the "OFF" position, disconnects power
to all circuits. Switch MUST be in "ON" position to
operate any circuit.
Base Control Box (CE)
2
3
Figure 2-3. Base Control Box and Labels
(Located at rear of hydraulic/electric side cabinet)
Base Control Box - This metal control station is
mounted on the rear of the base . It contains the
following controls:
1. Platform/Base Select Key Switch - Key to
"PLATFORM" position directs power to the operator's
control box on the platform. Key to "BASE" position
directs power to the base control box.
2. Platform Up/Down Selector Switch - This toggle
switch raises or lowers the platform to a desired
height.
3. Emergency Stop Button - This red "mushroom-
head" shaped button switch is designed to disengage
power to the platform controls.
2
1
SECTION 2, Page 1