Operator Warnings - Skyjack SJ-7027 Operating, Maintenance And Parts Manual

Operator Warnings

Warning
DO NOT exert excessive side
while elevated.
DO NOT overload. The lift relief valve does not
protect against overloading when the
platform is elevated.
DO NOT alter or disable limit switches or other
safety devices.
DO NOT exceed the rated capacity of your
scissorlift and make sure the load is
evenly distributed on the platform.
DO NOT raise your platform in windy or gusty
conditions.
Warning
Jobsite Hazards
DO NOT operate on surfaces not capable of
holding weight of the work platform
including the rated load, e.g. covers,
drains, and trenches.
DO NOT elevate the work platform if it is not on
firm level surfaces. Avoid pot holes,
loading docks, debris, drop offs and
surfaces that may affect the stability of
your work platform.
SECTION 1, Page 2
DO NOT
BE AWARE
forces on platform
ENSURE
An Operator Should Not Use Any Work Platform That:
•
•
•
•
•
•
June 2001
climb or descend a grade steeper than
35%. Elevated driving must only be done
on firm level surfaces. (Ref. Table 1-1)
of overhead obstacles, and poorly lit
areas in case of overhead obstacles.
that there is no person(s) in the path of
travel.
Warning
Work Platform Conditions
Has ladders, scaffolding or other devices mounted
on it to increase its size or work height.
Does not have a clean, uncluttered work area.
Does not appear to be working properly.
Has been damaged or appears to have worn or
missing parts.
Has alterations or modifications not approved by
the manufacturer.
Has safety devices which have been altered or
disabled.
SJ-600 Series Engine Powered