Advised Settings For Scan Jobs - Oce plotwave 345 Operation Manual

Advised settings for scan jobs

Introduction
When you use a certain type of original document you can select specific templates and settings
that influence the quality and productivity of your job. Use the advised settings in the table below
to get the best results.
Workflow
1. Start by selecting the best template for your job. Use the table below for the ten factory
installed scan templates.
Ten scan templates are factory installed on the system, and you can create new scan
templates in Océ Express WebTools. The first five factory installed templates are available on
the user panel after installation. You can enable or disable the templates via Océ Express
WebTools. For more information, see
disable scan templates on page
2. When you then want to further optimize the settings, you can select the advanced settings
when you tap the scan tile on the user panel. When you want to influence the imaging
process and thus optimize the output quality, you can select the corresponding [Original type]
for your job. For more information, see
original type on page
Advised settings
Scan template
01 - [Fast CAD B/W]
02 - [CAD B/W]
03 - [Fast Color]
04 - [Color]
05 - [Fast CAD Color]
06 - [Diazo/Blueprint
B/W]
07 - [CAD with fold-
ings]
08 - [CAD color to
B/W]
Create a new template on page 96
101.
Advanced settings for scan jobs on page 191
199.
Original document
Black and white CAD drawings, when productivity or a small file size is
an important factor.
Line information is enhanced and background is suppressed. For black
and white CAD originals with large area fills, choose the [CAD B/W]
template.
Black and white CAD drawings, when quality is an important factor.
Line information is enhanced and background is suppressed.
Productive scanning of a wide range of colored originals.
For originals with large area fills, choose the [Color] template.
Almost all originals, to make a good quality color scan.
The quality settings are balanced between color accuracy and the en-
hancement of fine information, while background is being suppressed.
Color CAD drawings, when productivity or file size is an important fac-
tor.
Line information is enhanced and background is suppressed. When
you have a CAD original with large area fills, choose the [Color] tem-
plate.
CAD original with a varying background, like a Diazo original or a Chi-
nese blueprint, to make a black and white scan.
Folded monochrome CAD original, to make a black and white scan.
Color CAD drawings, maps, business graphics etc., to make a black and
white scan.
Advised settings for scan jobs
Enable or
and
Chapter 4 - Use the Printing System
The
and
4
197