Activate A New License - Oce plotwave 345 Operation Manual

Activate a new license

Activate a new license
Introduction
Under the [Licenses] tab in Océ Express WebTools you can activate new license files.
NOTE
• It is advised to store the license information of the currently active license files in a back-up
file before you activate a new license file. Use the [Save] button to store the current license
files information.
• After the license is uploaded you must restart your system to activate the license file.
Procedure
1. Open the [Support] - [Licenses] tab to display the license information page.
2. Click [Activate] to open a browser window to search for the license file on the network.
3. Browse the network and select the license file.
4. Click [Next], read the step and click [Next] again.
5. When the user agreement appears, scroll down to the bottom and check the box in front of [I
agree].
NOTE
If you do not check the box for agreement, your license will not be installed.
6. Click [Next].
7. Click [OK] to start the activation of the license file. A message appears when the process is
completed.
8. Restart the system to activate the changes.
Result
• If you update an expired license, the new license file overwrites the previous license file.
• If you upload a new license, the license state in the overview is changed from [Not authorized]
to [Authorized].
256 Chapter 6 - License Management