Table of Contents
Advertisement
Available settings for scan jobs
Introduction
The Océ PlotWave 350 provides a lot of settings to manage all your different scan jobs.
These settings are used for extended scan jobs. The following table gives an overview and
a very short description of the available settings. You can find a detailed description of
each setting in the Océ Express WebTools.
Settings group: 'Destination'
#
Setting
'Destination'
Settings group: 'File type'
#
Setting
Note:
Depending on the color mode and file type you select the values for the
compression mode and organization will change. For some file types, the
compression and organization settings cannot be set in all situations. (see also
''File type' ' on page
Settings values
You can select one of
the names of the scan
destinations that you
configured in the Océ
Express WebTools.
Settings values
269)
Available settings for scan jobs
Function
'The destination to put the scans into.'
(see
'Configure a local scan destination' on
page
141)
Function
Chapter 5 - Use the printing system
263
Advertisement
Table of Contents
