Table of Contents
Advertisement
Make a copy of an original with highlighted colors
Introduction
When you have an original on which colors are used to accentuate or highlight information on a
black and white drawing, it can be difficult to make a good black and white copy. The Océ
PlotWave 345/365 has a special setting [Color highlighting], that highlights the color accents of
the original by making them darker than the other information.
NOTE
• The [Color highlighting] setting is only relevant for the copy modes: [Colored original], [Lines/
text], [Lines/text draft], [Folded lines/text], [Dark original].
• Control the level of accents with the [Lighter/Darker] setting. You can, for example, decrease
the [Lighter/Darker] value to reduce the difference between 'foreground' and 'background'
information. For more information, see
Procedure
1. Feed the original face up and centered on the original feeding table.
2. Tap the copy tile. A window with a list of presets opens.
3. Tap [Show all settings]. A list with settings opens.
4. Tap [Image] under the [Image] preset.
5. Tap [Color highlighting].
6. Select [On] and tap [OK].
7. Define the number of copies and tap the green button.
Make a copy of an original with highlighted colors
Preset category: Image on page
Chapter 4 - Use the Printing System
173.
185
Advertisement
Table of Contents
