Set A Default Print Destination - Oce plotwave 345 Operation Manual

Set a default print destination

Introduction
You can configure the default print destination in Océ Express WebTools. When the destination of
a print job is not specified in the job ticket or when there is no job ticket, the job is sent to a
default destination. You can choose between two default print destinations:
• [Both queue and Smart Inbox ]: the job is printed automatically and stored in the Smart Inbox.
• [Only Smart Inbox ]: the job is sent to the Smart Inbox and you have to start it locally.
NOTE
You can only set the default print destination, when the [Override destination of print jobs]
setting is set to [No, as specified in the job ticket]. You can find this setting under [Preferences] -
[System defaults] - [Job management].
Procedure
1. Select the [Preferences] - [System defaults] tab.
2. Click on [Edit] in the [Job management] section, or click on the setting [Default destination of
print jobs].
3. Select [Both queue and Smart Inbox ] or [Only Smart Inbox ].
4. Click [Ok] to confirm, or [Cancel] to reject your entries.
After you finish
Your preferred print destination is now default. All print jobs are sent to this destination when
you do not make other settings.
Chapter 3 - Define your Workflow with Océ Express WebTools
Set a default print destination
109